This tutorial is part 5 of 7 in the series: Getting Started with FreeBSD
When administering FreeBSD 10.1 servers, it is important to understand the basic maintenance procedures that will help you keep your systems in good shape.
In this guide, we will be covering the basic processes needed to keep your server up-to-date and functioning properly. We will be covering how to update the base operating system that the FreeBSD 10.1 team maintains. We will also discuss how to update and maintain optional software installed through the ports or packages systems. If you need help getting started with FreeBSD 10.1, follow our guide here.
Updating Base FreeBSD 10.1 Operating System
One important thing to realize when working with FreeBSD 10.1 is that the base operating system is built and managed separate from the other software on the system. This provides a number of benefits and allows the FreeBSD team to carefully test and develop the core functionality of the system. When you start using your server, there is a good chance that security updates have been published to the base system. To query the FreeBSD project's servers for these updates, download any new files, and install them on your system, type the following command:
sudo freebsd-update fetch install
If you are working off of a BIP media FreeBSD 10.1 installation,
sudo is included by default. If you are using another platform, you may need to install
sudo through the ports system or packages, or
su to root.
freebsd-update command is the management utility for software in the base operating system. The
fetch subcommand downloads any new updates, while the
install subcommand applies them to the live system.
If there are updates, you will see a list of software impacted by the update. You can scroll through with the down arrow or page through with the space bar. Once you reach the bottom of the list, the updates will be applied.
Any long-running software that was updated will need to be restarted to use the new version. If you see any updates to the kernel, a reboot will be needed to prevent strange behavior. You can do this by typing:
sudo shutdown -r now
It is possible to configure your system to automatically check for these security patches daily by setting up a
cron job. The
freebsd-update utility has a special
cron subcommand that is available specifically for this purpose.
This will pause for a random amount of time (up to an hour) in order to spread out the load on the download servers. It will then check for updates and download them (basically the
fetch operation in the background). If updates are downloaded, a specified user account will be notified. Updates are not automatically installed so that the administrator can decide on an appropriate time.
To set up this automatic checking, edit the
/etc/crontab file with
sudo vi /etc/crontab
At the bottom of the file, add a line that looks like this:
@daily root freebsd-update -t freebsd cron
The above command will run the update command automatically as the root user. If updates are found, the user account specified after the
-t component will be notified. In the above example, the default
freebsd user will be notified.
Save and close the file when you are finished.
The next time you log into the
freebsd account, you can check your mail by typing:
If updates were downloaded, you will see something like this:
Mail version 8.1 6/6/93. Type ? for help. "/var/mail/freebsd": 1 message 1 new >N 1 freebsd@freebsdserver Thu Dec 18 21:45 209/3997 "freebsdserver security updates" &
You can view the list of updates by typing the message number associated with the notification:
When you are satisfied with the software that will be changed, you can quickly install the updates by typing:
sudo freebsd-update install
Remember to restart the machine if any kernel patches were applied and to restart any services that were affected by the update.
Syncing the Operating System Sources
One task you probably want to do from time-to-time is to sync a copy of the FreeBSD 10.1 source code to your system. This is useful for a variety of reasons. Some ports require the current source to build correctly and the source can also be used to start tracking to a new software branch.
The FreeBSD 10.1 source code is maintained in an SVN repository. If you just need the most up-to-date version of the source, without the large overhead that subversion entails, you can use a utility called
svnup to sync the current sources. This is much faster than using subversion itself.
You can install the
svnup package by typing:
sudo pkg install svnup
If you prefer using the port, you can get that by typing:
cd /usr/ports/net/svnup sudo make config-recursive install clean
Once you have the utility, we should adjust the configuration file slightly. Open it with
sudo privileges in your text editor:
sudo vi /usr/local/etc/svnup.conf
First, we need to select a mirror from the list. There are multiple
host= lines in the configuration file, all of which are commented out. Select one that you think may be close to you and uncomment it:
. . . [defaults] work_directory=/var/tmp/svnup #host=svn.freebsd.org #host=svn0.us-west.freebsd.org host=svn0.us-east.freebsd.org #host=svn0.eu.freebsd.org . . .
Next, you should make sure that the sections of the file that describe each SVN branch are referencing the release version you are using. You can find this out your release version by typing this from the command line:
This tells us the branch of the operating system as well as the system patch level at the end. The portion we want to pay attention to for our current purposes is the number before the first dash. In this case, it specifies
RELEASE means that we are currently tracking the release branch, the most stable branch available for FreeBSD 10.1.
Back in the file, make sure that the definition for the
branch= parameter under
[release] is pointing to this number:
. . . [release] branch=base/releng/10.1 target=/usr/src . . .
This will ensure that you are downloading the correct source. Save and close the file when you are finished. Now, since we are tracking the release branch, we can type:
sudo svnup release
This will download the most recent version of the source tree to
/usr/src. You can update it at any time by re-running this command.
If you need the ability run subversion commands on the source, you will have to download the subversion tool. You can install the package by typing:
sudo pkg install subversion
If you prefer to use ports, you can acquire the tool by typing:
cd /usr/ports/devel/subversion sudo make config-recursive install clean
subversion command will take significantly more time. It will not only download the current version of each file in the tree, but the entire history of the project.
If you have previously synced source using the
svnup tool, you will need to remove the source tree before checking out the source using
sudo rm -rf /usr/src
Detailed instructions on how to use
subversion is outside of the scope of this guide. However, the general idea is to issue a
checkout command against one of the branches on one of the FreeBSD 10.1 source mirrors.
For instance, to checkout the same exact source that we did using the
svnup command above, we could type something like this:
sudo svn checkout https://svn0.us-east.FreeBSD.org/base/releng/10.1 /usr/src
Note that the URL for this command is basically just a combination of the
branch= definitions that we saw in the
svnup configuration file.
Updating the System's Record of Optional Software
FreeBSD 10.1 provides two different formats to install additional software on your server. The first is a source-based system called "ports" and the second is a repository of pre-compiled packages based on the available ports. For software that resides outside of the base operating system, a number of additional tools are used for management.
The system keeps information about the ports that can be installed within a directory hierarchy rooted at
/usr/ports. This directory structure is called the "ports tree". Before we touch any ports, we should make sure our ports tree has up-to-date information about our available software. We can use the
portsnap command to do this.
The syntax of the
portsnap command mirrors that of the
freebsd-update command in some ways. On BIP media, the source tree will be pre-populated with initial information about the available ports, which you can update as demonstrated in the second
If you are not using BIP media, your
/usr/ports directory will likely be empty when you are starting out. If this is the case, the first time you use
portsnap, you should use
sudo portsnap fetch extract
This will fetch a complete ports tree and extract it into
/usr/ports. This can take awhile and is only necessary if you don't have any information in
To update our system's information about available ports (every subsequent
portsnap run), type:
sudo portsnap fetch update
This process can take a bit of time depending on how recently you last updated the ports tree. It must download a fair number of files for every piece of available software that has been modified since its last run. This will populate the
/usr/ports hierarchy with information about ports.
pkg packaging system can leverage some of this information too. However, it also maintains its own database to keep track of the pre-built binary packages available for installation. To update this, you can type:
sudo pkg update
This will fetch the most recent package database information from the FreeBSD 10.1 project's servers. It's worth noting that for many
pkg operations, a
pkg update is performed automatically as part of the command execution, so it is not always needed as a stand-alone command.
Update the Optional Software
So far, we have learned how to update and apply updates to the base operating system. We have also learned how to update our operating system source code and how to refresh our local information about available ports and packages. Now, we can use this updated software information to download and apply updates to our optional software. The process will be different depending on whether you are using ports or packages. If you are using a mixture of these two, you may need to juggle some processes.
Finding Out Which Software can be Updated
The first step in updating your software is to find out which applications have new versions available. We can do this in a few different ways.
Checking for Updates with the pkg Command
If you would like to compare software that you have installed on your system against updated information about the newest versions available, you can use the
version subcommand of
pkg. This shows you the installed version and can optionally display information about available versions.
It is worth noting that this command will show optional software installed through both ports and packages. This command does not distinguish between the installation sources, so it is able to accurately show all updates available on your system.
We can see if our software is up-to-date by typing:
pkg version -vIL=
If there are references to a new version of any software in the latest index file (downloaded through the
portsnap command earlier), the output will display the discrepancies. For example:
perl5-5.18.4_10 < needs updating (index has 5.18.4_11)
Since we are checking the software installed on our system against the latest index file in our ports tree, sometimes you will be checking this at a point when there are updates in the ports tree that have not made their way to the package yet. This happens because the packages are built from the ports tree and often have to lag behind slightly. Because of this possibility, the above command may show updates that are not actually available as packages yet. To spot these instances, you can compare the output of the above command to the output of this command:
pkg version -vRL=
This command checks for new versions in the
pkg system's database of available packages (instead of the index file in the ports tree). If the two commands produce the same output, then you will be able to update any packages using the
If there are updates in the first command that do not show up in the second command, this means that the changes haven't been packaged yet. If you are using packages for the software that needs to be updated, you can either wait until the package catches up, or you can switch to the port to get the latest update now.
Checking for Updates with Portmaster
If you more often choose to build software from source using the ports system, an attractive alternative is the
portmaster command. This tool is useful for any ports-based software management tasks on FreeBSD 10.1, from checking for and applying updates, to installing or removing ports and all of their dependencies.
To get the
portmaster command, you can either install the package or compile it from the ports system.
To install the package, type:
sudo pkg install portmaster
If you'd rather compile the tool from source, switch to the package's directory in the ports tree and install it using make:
cd /usr/ports/ports-mgmt/portmaster sudo make install clean
Upon installation, you may see a message about adding some information to your
/etc/make.conf file and converting your package database. This is not necessary if you are starting from FreeBSD 10.1 or later.
Once you have
portmaster installed, you can check for updates by typing:
This will examine all of the software installed on your system and compare it against the index file to see if new versions are available. This operates in the same way as the
pkg command in that it will show updates regardless of whether the software was installed using ports or a package. It categorizes the software based on how it is connected to other software in terms of dependencies.
Any software that has updates available will have an indented line like this:
===>>> perl5-5.18.4_10 ===>>> New version available: perl5-5.18.4_11
At the bottom, a summary line will describe the number of applications that can be updated:
===>>> 42 total installed ports ===>>> 1 has a new version available
portmaster works primarily with ports, all of the detected updates should be available for application.
Checking for Software Vulnerabilities
FreeBSD 10.1 maintains a vulnerability database that should be checked regularly to ensure that there are no vulnerabilities in the software you have installed on your system. While it is sometimes beneficial to update all of the software on your system, at the very least, any software with known vulnerabilities should be updated at the earliest possible time. To check for known vulnerabilities with any of the optional software you have installed on your system, type:
pkg audit -F
This will download the latest vulnerability database from the FreeBSD 10.1 servers and check it against the installed software on your system. If any vulnerabilities exist with your installed software, it will alert you.
Checking the UPDATING Notes
Before you update any software, it is essential to check for any breakages that the updates may cause. The FreeBSD port maintainers must sometimes make changes that cannot be applied cleanly without user intervention. If you fail to check for these situations, you may end up with non-working software and potentially a broken system.
/usr/ports directory, a file called
UPDATING contains information about any software updates that may have unexpected results. To read this file, type:
This simple text file will contain information about any updates that require additional attention, regardless of whether the software is installed or not. Each entry will be marked with the date when the referenced update was committed to the ports tree. Another thing to note is that the file contains update information going all the way back to 2008. The file will look something like this:
This file documents some of the problems you may encounter when upgrading your ports. We try our best to minimize these disruptions, but sometimes they are unavoidable. You should get into the habit of checking this file for changes each time you update your ports collection, before attempting any port upgrades. 20141208: AFFECTS: users of ports-mgmt/poudriere, ports-mgmt/poudriere-devel AUTHOR: bdrewery@FreeBSD.org 8.4 jails created with Poudriere 3.1, or poudriere-devel-18.104.22.16841117 should be recreated with 'jail -d' and 'jail -c'. This fixes pkg(8) crashes. 20141205: AFFECTS: users of polish/kadu AUTHOR: pawel@FreeBSD.org Before running kadu 1.x for the first time upstream developers advise to backup your ~/.kadu directory. . . .
You should check this file for any update issues that have been added since the last time that you updated. Since this file contains a large amount of information that will not be relevant to the update you are considering, either because it concerns software not installed on your system, or because it details an issue from a previous update, you usually only have to check the entries closer to the top of the file. If there are any extra steps you need to take before the upgrade, complete them now.
Updating Packages and Ports
After taking any actions recommended in the
UPDATING file, you should now be ready to update your software. The methods that we use will depend on whether you want to use pre-compiled packages or source-based ports for your software.
If you are mainly using packages and wish to use this format for your upgrades, you can use the
pkg upgrade command:
sudo pkg upgrade
This should offer to upgrade all of the packages for which there are updates available. One thing to note about this method is that, if you are mixing packages and ports, a package update may attempt to reinstall software that you built using the ports system. This can happen when you compiled the application with different options, selected customizations that required different dependencies, etc. from the packaged version. This scenario will look like this:
freebsd@wowie:~ % sudo pkg upgrade Updating FreeBSD 10.1 repository catalogue... FreeBSD repository is up-to-date. All repositories are up-to-date. Updating database digests format: 100% Checking for upgrades (2 candidates): 100% Processing candidates (2 candidates): 100% The following 1 packages will be affected (of 0 checked): Installed packages to be REINSTALLED: portmaster-3.17.7 (options changed) The operation will free 1 KB. 40 KB to be downloaded. Proceed with this action? [y/N]:
In this case, the
portmaster command was installed through the ports system, but
pkg is trying to bring it into line with the version it knows about. If you wish to keep your customized ports version, you can press "N" to this operation and then lock the package by typing:
sudo pkg lock portmaster
This will prevent the software from being upgraded, allowing you to upgrade the rest of the software using the
pkg upgrade command. When you wish to upgrade the locked software, you can unlock it temporarily by typing:
sudo pkg unlock portmaster
If you are mainly using
portmaster and ports to handle your packages, you can upgrade all of your optional installed software by typing:
sudo portmaster -a
You will be asked to select options for the ports you are upgrading. If you do not know what any of the options mean, or if you don't have any specific reason for making a selection, it is okay to use the defaults.
If you use
portmaster before you upgrade your packages, because of the lag between port and package updates, there is a chance that some software that was previously installed using a package will now be updated using ports. If this is not a problem for you, feel free to use this method. If you would rather stick with packages for your software, it is probably best to wait until the update is repackaged.
If you wish to granularly update your packages, you can also upgrade a specific package by specifying its category and name as found in the port tree:
sudo portmaster category/portname
For instance, to upgrade the
vim-lite port, you could issue this command:
sudo portmaster editors/vim-lite
As you can see, there are quite a few different processes that need to take place in order to maintain your FreeBSD 10.1 servers. Some of these, like the process of updating the base system's source, do not need to be run frequently, while other tasks, like updating the base operating system and updating any software with known vulnerabilities, should be completed often. Maintaining your system may seem complicated at first, but will become fairly straight forward as you get familiar with the tools you are using. To find out more information about how to work with packages, follow this link. To get a better idea of how to work with ports, follow this guide.
Tags: don't wait to educate, FreeBSD, FreeBSD 10.1, Security, Basic FreeBSD Maintenance, FreeBSD Maintenance, Miscellaneous, System Tools
This work is licensed under a
Creative Commons Attribution-